Many users have experienced the power failure of the electric rolling shutter door. Pressing the remote control does not respond, and there is no manual key, which makes people feel at a loss. Then, how should we deal with this situation?

电动卷帘门停电怎样弄开

How to open the electric rolling shutter door in case of power failure

1、停电时门开着的，去拉电机上的一条链子，费一点时刻就能够关上门。可是人就会被关在室内。

1. When the power failure, the door is open. Pull a chain on the motor. It takes a little time to close the door. But people will be locked indoors.

2、停电时门关着的，人又在室内，去拉电机上的一条链子，费一点时刻就能够打开门。

2. When the power failure, the door is closed, and the person is indoors. To pull a chain on the motor, it takes a little time to open the door.

3、停电时门关着的，人又在室外，只要比及来电才解决。

3. When the power failure, the door is closed, and the person is outside, as long as compared to the call to solve.

在进行卷帘门安装的时分，能够安装不间断的电源比方后备电源，这样遇到停电时就不必担心了。

In the rolling shutter door installation time, can install uninterrupted power supply, such as backup power supply, so that there is no need to worry about power failure.

电动卷帘门停电的防备方法

Prevention method for power failure of electric rolling shutter door

计划一、为电动卷帘门按装不间断电源，停电就再也不怕了。

Plan one, install uninterruptible power supply for electric rolling shutter door, power failure will no longer be afraid.

计划二、购买时，应尽量选购带停电手动功能的卷帘门。

Plan 2, purchase, should try to purchase with power failure manual function rolling shutter door.

计划三、假如停电时您恰巧在门里边，可用配机铁链将卷帘门拉起。

Plan 3. If you happen to be in the door when the power is cut off, you can pull up the rolling shutter door with iron chain.

电动卷帘门的电机遥控不管用怎么办

How to do if the remote control of electric rolling shutter door doesn't work

，检查一下电机接收天线在不在，通常就是一根半截的细电线垂在外面。其次，按照说明书将电机上的信号接收器程序清零，重新用遥控器对码（详细操作步骤见说明书，不同车库门，操作略有不同。） 如果以上均不能解决，打售后服务电话，更换车库门电机。

First of all, check whether the motor receiving antenna is in, usually a half of the thin wire hanging outside. Secondly, clear the signal receiver program on the motor according to the manual, and then use the remote control to check the code again (see the manual for detailed operation steps. The operation of garage doors of different brands is slightly different.) If the above can not be solved, call after-sales service and replace the garage door motor.