随着经济的发展和社会的进步，对车库门的要求从原来的经济、耐用、低廉的发展到了平安、方便、快捷的速度，对自动车库门的需求大大增加。目前全自动车库门的种类比较多，由于开废方便，在市场上占有较高的市场份额，其工艺是将配重技术应用于翻板车库门及工业门领域，改变传统的手动及自动车库门技术的不足。

With the development of economy and the progress of society, the requirements of garage door from the original economic, durable, low price development to safe, convenient, fast speed, the demand for automatic garage door is greatly increased. At present, there are many kinds of full-automatic garage doors. Because it is convenient to open and discard, it has a high market share in the market. The process is to apply the counterweight technology to the field of flap garage doors and industrial doors, changing the shortcomings of traditional manual and automatic garage door technology.

1.在门的一侧安装配重系统。该配重系统可自然、连续地平衡组合门开关中的重量，大大减少现有自动车库门电机的负荷，只需小功率电机即可实现门开关，降低电机购买成本，延长电机寿命，减少损耗能源。

1. Install counterweight system on one side of the door. The counterweight system can balance the weight of the combined door switch naturally and continuously, and greatly reduce the load of the existing automatic garage door motor. Only a small power motor is needed to realize the door switch, so as to reduce the purchase cost of the motor, prolong the service life of the motor and reduce the energy consumption.

2.自平衡车库门或工业门可以放弃现有自动门使用的扭转弹簧平衡系统，重量调整系统可以平衡自然组合的门板的重量，无需使用扭转弹簧即可平衡重力，从而防止扭转弹簧因长期拉伸状态而造成的应力疲劳损伤，从而延长门的寿命，大大降低维修成本。

2. Self balancing garage door or industrial door can give up the torsion spring balance system used in the existing automatic door. The weight adjustment system can balance the weight of the naturally combined door panel, and can balance the gravity without using the torsion spring, so as to prevent the stress fatigue damage caused by the long-term tensile state of the torsion spring, so as to extend the service life of the door and greatly reduce the maintenance cost.
                              

随着私家车使用量的增加，很多家庭在购买或建造房子时会考虑预订车库，车库可以更好地保护车辆，因此车库里应该设置稳定的车库门。

With the increasing use of private cars, many families will consider booking a garage when they buy or build a house. The garage can better protect the vehicles, so the stable garage door should be set in the garage.

由于车库内空间和周围地面受限，大部分车库使用快门或折叠门打开车库后减少地板空间的占用，快门或折叠门的结构强度一般较低，稳定性也低于一般整体门板，电动机故障后很难手动打开。

Due to the limited space in the garage and the surrounding ground, most garages use shutter or folding door to reduce the occupation of floor space after opening the garage. The structural strength of shutter or folding door is generally low, and the stability is also lower than that of the general integral door panel. It is difficult to open the garage manually after motor failure.

为解决技术不足，提供板车库门。整个面板车库门包括方形的整个门面板、拖动电机、牵引绳和导轨。轨迹包含一个或两个垂直轨迹，一个垂直轨道上设置滑块，两个垂直轨道上设置两个滑块，一个水平轨道上有三个滑块，两个水平轨道上有四个滑块，滑块分别连接到整个门面板的四个角。以上述方式，在整个面板车库门2滑块向上移动的同时，4个滑块向后移动，使整个门板向上移动和翻转，完成开门动作，反过来把门关上，使整个门板结构强度好，开关门稳定性好。

In order to solve the technical problems, the full panel garage door is provided. The whole panel garage door includes the whole square door panel, drag motor, traction rope and guide rail. The track includes one or two vertical tracks. One vertical track has slider, two vertical tracks have two slider, one horizontal track has three slider, and two horizontal tracks have four slider. The slider is connected to the four corners of the whole door panel. In the above way, while the 2 sliders of the whole panel garage door move upward, the 4 sliders move backward to make the whole door plate move upward and flip, complete the opening action, and in turn close the door, so that the whole door plate has good structural strength and good door opening and closing stability.

感谢大家耐心看完，如果想要更多关于车库门卷帘门的相关知识，欢迎联系我们济南卷帘门厂官网！

Thank you for your patience. If you want to know more about the rolling door of garage door, please contact the official website of Jinan rolling door factory!