欢迎光临济南市天桥区昌达卷帘门加工部官网!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯>>卷帘门正常升降出现故障问题如何处理?
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://www.jnhsjlm.com

地址:济南市天桥区金牛建材市场

卷帘门正常升降出现故障问题如何处理?

来源:http://www.jnhsjlm.com 日期:2021-04-13 发布人:hongshun
现在卷帘门在我们生活中应用很广泛,不管是车库还是商店,卷帘门的安全性和方便性都让它备受欢迎。既然使用广泛,那不免在过程中就会遇到各各样的问题,例如不能正常升降等等。一些简单的故障问题如果我们知道解决方法,就会减少很多麻烦。今天小编就来跟大家分析分析卷帘门升降故障的原因,以及该如何解决。
Now rolling door is widely used in our life, whether it is a garage or a store, the safety and convenience of rolling door make it popular. Since it is widely used, it will inevitably encounter various problems in the process, such as not being able to lift normally and so on. Some simple fault problems, if we know the solution, will reduce a lot of trouble. Today, Xiaobian will analyze the reasons for the failure of rolling shutter door lifting and how to solve it.
一,看看是否是电源问题造成的卷帘门升降故障。电源问题是总问题,检查电源和电路是否短路或是没有通电,如果电源开关的问题会导致卷帘门电机不通电不能够正常升降。同时需要检查下卷帘门是否有漏电或是保险管有没有烧坏的情况,如果保险丝断了,这个时候我们就需要重视起来了。全 面的检查还是有必要的。
1、 To see if it is the power problem caused by the rolling shutter door lifting fault. The problem of power supply is the general problem. Check whether the power supply and circuit are short circuited or not. If the power switch is faulty, the rolling shutter motor will not be able to rise and fall normally. At the same time, we need to check whether the lower roller shutter door has leakage or whether the safety tube is burnt out. If the fuse is broken, we need to pay attention to it at this time. A comprehensive examination is necessary.
                                       济南卷帘门厂
二,检查卷帘门的电机情况,电机是卷帘门能够升降的主要动力,我们需要检查电机是否能够正常运作,如果电机出现了损坏,则需要更换电机,或是找的维修师傅进行维修了。
2、 Check the motor condition of the rolling shutter door. The motor is the main power for the rolling shutter door to rise and fall. We need to check whether the motor can operate normally. If the motor is damaged, we need to replace the motor or find a professional maintenance technician to repair it.
三,检查卷帘门连接部分是否有损坏,检查电路是否正常,如果快速门连接地方出现问题,也可以导致卷帘门不能够正常的进行升降,出现这问题我们只要对连接的地方进行维修就可以了。
3、 Check whether the connecting part of the rolling shutter door is damaged, and check whether the circuit is normal. If there is a problem in the connecting part of the fast door, it can also cause the rolling shutter door not to lift normally. If there is such a problem, we just need to repair the connecting part.
四,观察电机线和限位信号线的情况,如果电机线和限位信号线上是正常的,这个时候还是不能开关,这个时候我们需要检查卷帘门的控制盒的线路和按钮是否是正常的,如果有故障,更换按钮或是将线路连接好就可以了。
4、 Observe the motor line and limit signal line. If the motor line and limit signal line are normal, the switch still can't be turned on at this time. At this time, we need to check whether the circuit and button of the control box of the rolling shutter door are normal. If there is any fault, just replace the button or connect the circuit.

推荐阅读/ Recommended reading

卷帘门的电机设计主要是针对其运行特点来决定的,它主要是通过的工程师来做出精心的设计。即使您的电动卷帘门的开启非常的频繁,也无需考虑

铝合金卷帘门适用于哪些地方? 2021-05-11
如何提高车库门整体设备精度? 2021-05-07
济南卷帘门厂使用电动卷帘门期间定期检查的重要性? 2021-05-05
卷帘门故障改怎么处理? 2021-04-28

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门