What are the methods to deal with the wire rope falling off of rolling shutter door? Next, the rolling door manufacturers popularize the treatment methods of wire rope falling off for you.

一、将门慢慢往上推开，然后把脱落的钢丝绳理顺，将套钢丝绳的铝盘螺丝松动，然后慢慢把钢丝绳按顺序套在铝盘上，调节两边钢丝绳到力度相当，然后固定，手动试门，能够轻松将门打开就可以了。如果不行，再重新调整。

1、 Push the door up slowly, straighten out the fallen steel wire rope, loosen the screw on the aluminum plate of the steel wire rope, then slowly put the steel wire rope on the aluminum plate in order, adjust the steel wire rope on both sides to the same strength, then fix it, and test the door manually, so that the door can be opened easily. If not, adjust again.
                                        

二、将扭簧力度全部消掉，重新按安装的方式安装一遍。

2、 Eliminate all the strength of the torsion spring and install it again according to the installation method.

PS：卷帘门钢丝绳脱落一般只会脱一条，不会两条同时脱落，这时另一条仍然套在铝盘上，扭簧依然有很大的扭力，处理时还是比较危险的，用户不要擅自处理，以防伤人，应该找的维修师傅维修。

PS: generally, only one wire rope will fall off when the rolling shutter door wire rope falls off, and not two wires will fall off at the same time. At this time, the other wire rope is still set on the aluminum plate, and the torsion spring still has a lot of torque, which is relatively dangerous. Users should not deal with it without authorization, in order to prevent injury, they should find a professional repairman to repair it.

感谢您的阅读，希望以上内容能对您有所帮助，如您想了解更多精彩内容请点击我们的官网：济南卷帘门厂http://www.jnhsjlm.com。

Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Jinan roller shutter door factory http://www.jnhsjlm.com 。