欢迎光临济南市天桥区昌达卷帘门加工部网站!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯卷帘门运用和修理的九个留意事项跟维修方法
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://www.jnhsjlm.com

地址:济南市天桥区金牛建材市场

卷帘门运用和修理的九个留意事项跟维修方法

来源:http://www.jnhsjlm.com 日期:2022-01-14 发布人:
卷帘门的安装维修方法:
Installation and maintenance methods of rolling shutter door:
1、卷帘门金属部位要留意维护和养护,避免有生锈或许腐蚀景象呈现。
1. The metal parts of the rolling shutter door shall be maintained to avoid rust or corrosion.
2、卷帘门底梁座上限方位有必要跟轴承少200mm间隔,保证制动中止时不发作冲顶的景象。
2. The upper limit orientation of the roller shutter bottom beam seat must be at least 200mm away from the bearing to ensure that there is no jacking when braking is stopped.
3、卷帘门运转时如果呈现较大颤动或许是反常声响时主张立即停机查看,而且查看是不是有阻止运转的杂物。
3. If there is a large vibration or abnormal sound during the operation of the rolling shutter door, it is recommended to stop the machine immediately and check whether there are sundries that prevent the operation.
4、主张每年对卷门机进行3次查看,及时上油保证运转质量。
4. It is proposed to check the door rolling machine three times a year and oil it in time to ensure the operation quality.
5、留意卷帘门漆面的养护和防腐处理。
5. Pay attention to the maintenance and anti-corrosion treatment of the paint surface of the rolling shutter door.
6、卷帘门操作的时分,操作者有必要站在卷门运转状况方位进行操作,避免发作意外危害。
6. During the operation of the rolling shutter door, it is necessary for the operator to stand in the operation position of the rolling shutter door to avoid accidental hazards.
7、当卷帘门拉下知道长度的时分跟地上间隔不应该大于50MM。
7. When the rolling shutter door is pulled down and the length is known, the distance between it and the ground shall not be greater than 50mm.
8、卷帘门设备方位上方有必要具备防火设备,下端安顿包箱或许吊顶时有必要设置活动拆式活动盖板,下端有必要预留500MM边长的可拆卸修孔,便于修理养护。
8. It is necessary to have fire prevention equipment above the equipment orientation of the rolling shutter door. When installing the box or ceiling at the lower end, it is necessary to set a removable cover plate, and it is necessary to reserve a removable repair hole with a side length of 500mm at the lower end to facilitate repair and maintenance.
9、在卷帘门运用前先查看明白其运转方向,长度以及门洞高度的方位,也不要轻易损坏限位器,避免形成反卷冲顶等丢失。
9. Before using the rolling shutter door, check and understand its operation direction, length and door opening height, and do not easily damage the limiter to avoid loss of anti rolling and roof punching.
卷帘门运用和修理的九个留意事项:
Nine precautions for application and repair of rolling shutter door:
一、电动卷帘门修理操作时,操作者有必要站在能看到卷门运转状况的方位进行操作,不然易发作意外而受损。
1、 During the repair operation of the electric rolling shutter door, it is necessary for the operator to stand in the direction where the operation condition of the rolling shutter door can be seen, otherwise it is easy to be damaged by accident.
二、卷帘门门帘和卷门机制止与酸、碱性物溶液触摸,以防腐蚀门帘外表。
2、 Rolling shutter door curtain and rolling door mechanism shall not touch with acid and alkaline solution to prevent corrosion of the appearance of the door curtain.
三、卷帘门的卷门机在运转、滑行、传动等部位应定时查看(少每年2次),并根据需要及时加油,以保证卷帘门的正常运用。
3、 The door rolling machine of the rolling shutter door shall be checked regularly (at least twice a year) in the operation, sliding, transmission and other parts, and refuel in time as needed to ensure the normal operation of the rolling shutter door.
四、伸缩门修理在启闭中止过程中,应具备随位中止之功用,不应有中止而持续下滑景象,如发作下滑间隔大于50mm的状况呈现,应立即对电动智能卷帘门操控电器和卷门机制动器进行仔细查看修理,运转正常中止。
4、 In the process of opening and closing, the telescopic door repair shall have the function of follow-up suspension, and there shall be no continuous sliding scene due to suspension. If the sliding interval is greater than 50mm, the electric intelligent rolling shutter door control appliance and rolling door mechanism actuator shall be carefully inspected and repaired immediately, and the operation shall be stopped normally.
五、卷帘门门帘和易锈部ftg14r位,应进行定时防腐、油漆及养护处理,制止用重物、硬物冲击门面。
5、 The rolling shutter door curtain and rusty part ftg14r position shall be subject to regular anti-corrosion, paint and maintenance treatment to prevent heavy objects and hard objects from impacting the door surface.
六、卷帘门运转时如有发作较大颤动或反常声响时应停机查看,排除有碍门帘正常启闭的杂物。
6、 In case of large vibration or abnormal sound during the operation of the rolling shutter door, stop the machine for inspection to eliminate the sundries that hinder the normal opening and closing of the shutter.
七、伸缩门修理底梁座上限方位有必要与轴承架下端坚持大于200mm的间隔,以保证制动中止时不发作冲顶景象。
7、 It is necessary to maintain an interval of more than 200mm between the upper limit of the bottom beam seat of the telescopic door and the lower end of the bearing frame, so as to ensure that there is no jacking phenomenon when the braking is stopped.
八、卷帘门设备方位的上端应有可靠的防火设备,在卷帘门的卷筒下端做包箱或吊顶时有必要设置可拆式活动盖板,在电动卷门机一侧下端有必要预留500×500mm可拆检修孔,以便于修理养护。
8、 Reliable fire prevention equipment shall be provided at the upper end of the equipment orientation of the rolling shutter door. When making a package box or ceiling at the lower end of the drum of the rolling shutter door, it is necessary to set a removable movable cover plate, and it is necessary to reserve 500 at the lower end of one side of the electric rolling shutter machine × 500mm removable manhole to facilitate repair and maintenance.
九、一切电动卷帘门,启闭运转方向有必要与开关箱指示相同,特别是在新接通电源试车或外来输入电源改换相线时,应先运用手动设备将门帘置于门洞高度1/2的方位,接通电源后试操作卷门启闭,直到与指示相附,方可正常运用,不然损坏限位器,导致卷帘反卷或冲顶等而形成丢失。
9、 The opening and closing direction of all electric rolling shutter doors must be the same as that indicated by the switch box, especially when the power is newly connected for commissioning or the phase line is changed by external input power, the door curtain shall be placed at the position of 1 / 2 of the door opening height with manual equipment, and the rolling shutter shall be opened and closed after the power is connected for trial operation until it is attached to the indication, otherwise the limiter will be damaged, Cause the rolling shutter to roll back or punch, etc., resulting in loss.
本文的精彩内容由济南卷帘门为您提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:http://www.jnhsjlm.com我们有专门的客服为您解答问题
The wonderful contents of this article are provided by Jinan roller shutter door. There are many wonderful contents on this website. You can click to enter more contents: http://www.jnhsjlm.com We have special customer service to answer your questions

阅读/ Recommended reading

1、卷帘机应定期检查(少每年3次),并根据需要及时加油,以确保快速卷帘门的正常使用。1. The rolling shutter machine should be regula...

济南卷帘门厂:电动卷帘门的电动驱动标准 2024-03-20
电动卷帘门如何选择合适的型号 2024-03-17
PVC卷帘门适用于哪些场合? 2024-03-17
自动伸缩门维修技巧及工作原理 2024-03-13

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门