有很多朋友都在问不锈钢卷帘门遥控器要怎么配，那本期不锈钢卷帘门厂家小编就针对这个问题给大家分享一下吧。

　　There are a lot of friends asking how to match the stainless steel shutter door remote control, then this period of stainless steel shutter door manufacturer xiaobian for this problem to share with you,

　　不锈钢卷帘门遥控器系统，一般不锈钢卷帘门遥控器系统是分发射与接收两个部分，发射部分一般分为两种类型，即遥控器与发射模块，遥控器和遥控模块是对于使用方式来说的，遥控器可以当一个整机来独立使用，对外引出线有接线桩头。

　　Stainless steel rolling door remote control system, general stainless steel rolling door remote control system is the emitting and receiving points of two parts, the emission part generally divided into two types, namely remote control and emission module, remote control and remote control module is for use, the remote control can be used independently as a machine, external lead wiring pile head.

　　而遥控模块在电路中当一个元件来使用，根据其引脚定义进行应用。接收部分也是可以分两种类型的，即超外差与超再生接收方式，超再生解调电路也称超再生检波电路，它实际上是工作在间歇振荡状态下的再生检波电路。

　　The remote control module in the circuit when a component to use, according to its pin definition for application. The receiving part can also be divided into two types, namely super heterodyne and super regenerative receiving mode. Super regenerative demodulation circuit is also called super regenerative detection circuit, which is actually a regenerative detection circuit working in the intermittent oscillation state.

　　就门遥控器的接收部分来看，可以分为超外差和超再生两种方式。超再生解调电路也被称为超再生检波电路，实际上就是在间歇振荡状态下的再生检波电路。

　　In terms of the receiving part of the door remote control, it can be divided into superheterodyne and superregenerative two ways. Superregenerative demodulation circuit is also called superregenerative detection circuit, which is actually a regenerative detection circuit in intermittent oscillation state.

　　超外差式解调电路同超外差收音机相似，是设置一本机振荡电路产生振荡信号，同接收到的载频信号混频后，得到的中频信号，经中频放大和检波，然后解调出数据信号。在不锈钢卷帘门遥控器的配置上也常常采取这两种方式。

　　The superheterodyne demodulation circuit is similar to the superheterodyne radio, in which a local oscillation circuit is set to generate oscillation signals, which are mixed with the received carrier frequency signal, and the intermediate frequency signal is obtained, which is amplified and detected by the intermediate frequency, and then demodulated to the data signal. In the configuration of stainless steel shutter door remote control, these two ways are often adopted.

　　在遥控器的配置上可以分为红外遥控器和无线遥控器，它们是由于不同的载波来说的，红外遥控器是利用红外线来进行传送控制信号的，特点是具有方向性、中间不能有阻挡、距离一般都不会超过7米、同时不会受电磁干扰，电视机遥控器采用的比较多的就是红外遥控器。

　　On the configuration of the remote control can be divided into the infrared remote control and wireless remote control, they are due to different carrier, is the use of infrared remote control infrared for transfer of control signal, characteristic is directional, middle distance can't stop, are usually not more than 7 meters, and won't be affected by electromagnetic interference, the TV remote control is adopted more infrared remote control.

　　无线电遥控器是利用无线电波来传送控制信号的，特点是具有无方向性，中间有遮挡物也可以进行控制，控制距离远，但容易受到电磁干扰。在需要远距离穿透的地方非常的实用。

　　Radio remote control is the use of radio waves to transmit control signals, is characterized by no direction, there are shielding in the middle can also be controlled, control distance is far, but prone to electromagnetic interference. Very useful where long distance penetration is required.

　　好了，以上就是不锈钢卷帘门厂家小编整理回答的全部内容，其实一般不锈钢卷帘门需有电机才能安装遥控器，要不然你只能安装防盗器。更多内容就来网站www.jnhsjlm.com咨询吧！

　　Well, the above is the whole content of the stainless steel rolling shutter door manufacturer. In fact, the general stainless steel rolling shutter door needs a motor to install the remote control, otherwise you can only install anti-theft device. More content to the website www.jnhsjlm.com consultation!