感应玻璃门是如今在我们的生活中常见的一种类型的门，使用范围是越来越广泛，当然如果在平常中不注意使用的话也会有损坏的，下面卷帘门厂家就来了解下用于通道的感应玻璃门使用内容吧。

Induction glass door is a common type of door in our life today, and its scope of use is becoming more and more extensive. Of course, if you don't pay attention to its use in ordinary times, it will be damaged one day. Let's learn about the use of induction glass door for passage from the roller shutter door manufacturer.

济南卷帘门厂温馨提示1：

Jinan rolling shutter door factory warm prompt 1:

1）通道感应玻璃门使用前应进行功能调试，调试正常后方可使用。

1) The channel sensing glass door shall be subject to functional commissioning before use, and can be used only after the commissioning is normal.

2）通道感应玻璃门开启后，不允许站在通道内。

2) After the channel sensing glass door is opened, it is not allowed to stand in the channel.

3)刷卡的行人在指示灯变为绿色之前不得进入通道。

3) Pedestrians swiping cards shall not enter the passage until the indicator light turns green.

4)行人进入通道后不得在通道内停留。

4) Pedestrians shall not stay in the passage after entering the passage.

5）行人不得拥挤进入通道，行人之间应保持一定距离；

5) Pedestrians shall not enter the passage in a crowded way, and a certain distance shall be kept between pedestrians;

6)不允许快速通过通道。

6) Fast passage is not allowed.

7)走道感应玻璃门不得碰撞、晃动。当走道感应玻璃门不能工作时，应妥善管理；

7) The induction glass door of the walkway shall not be collided or shaken. When the induction glass door of the walkway cannot work, it shall be properly managed;

8)通道感应玻璃门关闭时，不允许用力推拉或撞击通道感应玻璃门。

8) When the channel sensing glass door is closed, it is not allowed to push, pull or impact the channel sensing glass door.

济南卷帘门厂温馨提示2：

Jinan rolling shutter door factory warm prompt 2:

1）进行维护时，断开所有外部开关设备（门禁和控制台等）。

1) During maintenance, disconnect all external switchgear (access control, console, etc.).

2）当没有合适的安装基础时，不允许安装通道感应玻璃门。

2) When there is no suitable installation foundation, it is not allowed to install channel sensing glass doors.

3)必须有一个主电源开关或其他电流操作装置。

3) There must be a main power switch or other current operated device.

4)调试前，确保所有电气和功能特性都已经过测试。

4) Before commissioning, ensure that all electrical and functional characteristics have been tested.

5)通道感应玻璃门的接线必须按照所附接线图进行。

5) The wiring of the channel sensing glass door must be carried out in accordance with the attached wiring diagram.

6)只有经过认证和培训的电气技术人员才能进行电气连接。

6) Only certified and trained electrical technicians can make electrical connections.

7)只有经过认证和培训的电气技术人员才能卸下外壳盖、插入电源插座、电源接收器或电源线。

7) Only qualified and trained electrical technicians can remove the housing cover and plug in the power socket, power receiver or power cord.

8)在维修工作中，必须检查螺栓，必要时拧紧。

8) During the maintenance work, the bolts must be checked and tightened if necessary.

9)带电部件如开关电源、电机、电阻、电机和灯具的固定外壳等，在工作温度条件下会灼伤皮肤，请勿触摸。

9) Live parts such as switching power supply, motor, resistor, fixed shell of motor and lamp, etc. may burn skin under operating temperature. Do not touch them.

10)产品使用过程中，禁止坐在感应玻璃门上或用力挤压，否则会对感应玻璃门造成不必要的损坏。

10) During the use of the product, it is forbidden to sit on the induction glass door or squeeze it forcefully, otherwise it will cause unnecessary damage to the induction glass door.

11)建议用户根据电气特性使用正确的通道感应玻璃门接口，否则会损坏通道感应玻璃门和用户的其他通道感应玻璃门。

11) It is recommended that the user use the correct channel sensing glass door interface according to the electrical characteristics, otherwise the channel sensing glass door and other channel sensing glass doors of the user will be damaged.

以上就是今天为大家分享的关于问题的相关内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站http://www.jnhsjlm.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.jnhsjlm.com 。