卷帘门作为各大商店、商场车库中不可缺少的门型，深受大家的喜爱。济南不锈钢卷帘门由于其独特的功能，充分发挥了其在岗位上的作用。其中比较重要的部分是卷帘机。不锈钢卷帘门卷帘机有一定的要求。接下来，我们来看看不锈钢卷帘门卷帘机的要求。

As an indispensable door type in the garages of major stores and shopping malls, roller shutter doors are deeply loved by everyone. Jinan stainless steel roller shutter door has given full play to its role in the post due to its unique function. One of the more important parts is the roller shutter machine. Stainless steel rolling shutter door rolling shutter machine has certain requirements. Next, let's take a look at the requirements of the stainless steel rolling shutter door rolling shutter machine.

外观及零件

Appearance and parts

1.卷门机外壳应完整，无缺角、明显裂纹和变形。

1. the shell of the door rolling machine shall be complete without missing angle, obvious crack and deformation.

2.涂层零件表面应光滑，无明显气泡、皱纹、斑点、流挂等缺陷。

2. the surface of coated parts shall be smooth without obvious bubbles, wrinkles, spots, sagging and other defects.

3.卷门机的零件不得由易燃和可燃材料制成。

3. the parts of the door rolling machine shall not be made of flammable and combustible materials.

4.卷门机的控制设备应有利于员工的控制。

4. the control equipment of the door rolling machine shall facilitate the control of employees.

基本性能

Basic performance

1.卷门机的额定输出扭矩应符合设计要求。制造商应提供检验证书。

1. the rated output torque of the door rolling machine shall meet the design requirements. The manufacturer shall provide the inspection certificate.

2.卷帘门机的制动抱闸应安全可靠，在额定输出扭矩下制动力不小于对重的1.5倍，滑动位移不超过20mm。

2. the brake band brake of the rolling shutter door machine shall be safe and reliable. Under the rated output torque, the braking force shall not be less than 1.5 times of the counterweight, and the sliding displacement shall not exceed 20mm.

3.卷门机应配备手动操作装置，手动操作装置应方便可靠，安装位置应便于操作。使用手动操作设备操作不锈钢卷帘门的开启和关闭时，严禁滑动碰撞。

3. the door rolling machine shall be equipped with a manual operating device, which shall be convenient and reliable, and the installation position shall be easy to operate. When using manual operation equipment to open and close the stainless steel roller shutter door, it is strictly prohibited to slide and collide.

4.卷帘门机应具有电动开关和借助不锈钢卷帘门总重量不断滑动的功能。电动开关和自重滑动的速度应符合6.4.5的要求。不锈钢卷帘门开始自重减轻的臂力不大于70N。

4. the rolling shutter door machine shall have the function of electric switch and continuous sliding with the help of the total weight of the stainless steel rolling shutter door. The speed of electric switch and self weight sliding shall meet the requirements of 6.4.5. The arm strength of the stainless steel roller shutter door reduced at the beginning of its self weight shall not be greater than 70N.

5.济南卷帘门厂厂家认为卷门机应配备全自动限位装置，当不锈钢卷帘门打开和关闭到上、下，该装置能自动终止，其重复准确定位误差应小于20mm。

5. the manufacturer of Jinan rolling shutter door factory believes that the rolling shutter should be equipped with a full-automatic limit device. When the stainless steel rolling shutter door is opened and closed to the upper and lower limits, the device can automatically terminate, and its repeated accurate positioning error should be less than 20mm.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站http://www.jnhsjlm.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.jnhsjlm.com And consult our staff, will serve you wholeheartedly.