欢迎光临济南市天桥区昌达卷帘门加工部官网!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯>>感应玻璃门保护大家通行安全的配置
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://www.jnhsjlm.com

地址:济南市天桥区金牛建材市场

感应玻璃门保护大家通行安全的配置

来源:http://www.jnhsjlm.com 日期:2022-08-04 发布人:hongshun
感应玻璃门随着社会发展安装使用的场合越来越多,像宾馆、酒店,大型购物广场都能见到它的身影。今天济南卷帘门厂小编就为大家揭秘感应玻璃门保护大家通行安全的配置有哪些。
With the development of society, induction glass doors are installed and used in more and more occasions, such as hotels, hotels and large shopping malls. Today, the editor of Jinan roller shutter factory will reveal the configuration of inductive glass doors to protect everyone's traffic safety.
1、接触式防夹传感器
1. Contact anti pinch sensor
为防止感应玻璃门的旋转扇立框在运行中推挤行人,在展箱立柱与出入口右侧立柱上安装的防夹橡皮胶条内装有接触式防夹感应器,如碰到物体或行人受压时,门扉立即停止转动并且反转60cm,防止夹伤行人;直至胶条被感应器恢复正常状态,感应玻璃门也随之恢复正常运行。
In order to prevent the rotating fan frame of the induction glass door from pushing pedestrians during operation, contact anti pinch sensors are installed in the anti pinch rubber strips installed on the column of the exhibition box and the column on the right side of the entrance and exit. If objects or pedestrians are pressed, the door leaf immediately stops rotating and reverses 60cm to prevent pedestrians from being hurt; Until the rubber strip is restored to normal state by the sensor, the sensing glass door will also return to normal operation.
2、展箱红外防夹传感器
2. Exhibition box infrared anti pinch sensor
为防止感应玻璃门的旋转扇立框在运行中碰撞行人,在转门华盖顶部安装了红外安全传感器,形成由顶部向下发射的发射检测光束。当探测到门扉与立柱之间有物体或行人时感应玻璃门立即停止转动以防挤伤行人。
In order to prevent the rotating fan frame of the induction glass door from colliding with pedestrians during operation, an infrared safety sensor is installed on the top of the revolving door canopy to form an emission detection beam emitted downward from the top. When objects or pedestrians are detected between the door leaf and the column, the sensing glass door immediately stops rotating to prevent pedestrians from being crushed.
3、红外线对射传感器
3. Infrared radiation sensor
一只位于转门弧形门翼及展箱门立柱上,距地面685mm。当感知行人或物体时(即射线被挡住)转门以慢速旋转;排除后,2秒钟转门恢复正常运转。另一只位于转门弧形门翼底部及展箱立柱上,距地面85mm。当感知行人或物体时,感应玻璃门立即停止。与减速对射传感器配套使用,以防止行人碰伤夹伤。
One is located on the arc wing of the revolving door and the column of the exhibition box door, 685mm from the ground. When sensing pedestrians or objects (i.e. the rays are blocked), the revolving door rotates at a slow speed; After troubleshooting, the revolving door returns to normal operation in 2 seconds. The other one is located at the bottom of the radial wing of the revolving door and on the column of the exhibition box, 85mm from the ground. When sensing pedestrians or objects, the sensing glass door stops immediately. It is used in conjunction with the deceleration reflection sensor to prevent pedestrians from bumping and pinching.
济南卷帘门厂
4、旋转翼防夹脚传感器
4. Rotary wing anti pinch sensor
安装在旋转翼防夹胶条下部,当行人或物体遮挡后,感应玻璃门自动停止旋转,确保行人足部与宠物的安全,当探测到行人或宠物离开后,感应玻璃门恢复运转。
It is installed at the lower part of the anti pinch strip of the rotating wing. When pedestrians or objects are blocked, the sensing glass door will automatically stop rotating to ensure the safety of pedestrians' feet and pets. When pedestrians or pets are detected to leave, the sensing glass door will resume operation.
5、立柱防夹脚传感器
5. Column anti pinch sensor
安装在转门出入口右侧离近地面处,待转门展箱曲壁运转至右侧立柱500-600mm时,开始工作,当感知物体后,转门停止运转。确保行人足部与宠物安全,与外门柱红外线防夹传感器配套使用,消除感应空白区域,实现对同行者的全方位的保护。
It is installed near the ground on the right side of the entrance and exit of the revolving door. When the curved wall of the revolving door exhibition box runs to 500-600mm of the right column, it starts to work. When the object is sensed, the revolving door stops running. To ensure the safety of pedestrians' feet and pets, it is used together with the infrared anti pinch sensor of the outer door post to eliminate the sensing blank area and realize the all-round protection of pedestrians.
6、主危险区域防夹传感器
6. Main hazardous area anti pinch sensor
安装在转门出入口华盖底部,感应角度垂直向下,在弧形门翼与立柱500-600mm间距时开始工作,至弧形门翼全部通过立柱时结束。当行人或物体进入感应区域后,转门停止运行,有效防止夹上行人;当行人或物体离开后,感应玻璃门恢复正常运转。
It is installed at the bottom of the canopy at the entrance and exit of the revolving door, and the sensing angle is vertical downward. It starts to work when the distance between the arc gate wing and the column is 500-600mm, and ends when the arc gate wing passes through the column. When pedestrians or objects enter the sensing area, the turnstile stops running, effectively preventing pedestrians from being caught; When pedestrians or objects leave, the sensing glass door returns to normal operation.
请广大感应玻璃门使用方注意了,虽然感应玻璃门安装了这么多的保护装置,但是只要是机器就是需要维护保养,不要只使用不维护。更多相关内容就来我们网站http://www.jnhsjlm.com咨询吧。
Please note that although the induction glass door is equipped with so many protective devices, as long as the machine is in need of maintenance, don't just use it without maintenance. Come to our website for more relevant content http://www.jnhsjlm.com Consult.

推荐阅读/ Recommended reading

快速卷帘门的卷筒采用高精度钢管加工,确保卷筒高速卷动时动平衡,导轨有冷轧钢板表面喷塑,不锈钢和铝合金三种材料供用户选择。那么在使用

铝合金卷帘门应用技巧的相关事项 2022-09-24
防火卷帘门是利用什么原理防火的? 2022-09-22
车库门在使用中噪音大啥原因 2022-09-20
车库门几个常见问题解析 2022-09-14

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门