欢迎光临济南市天桥区昌达卷帘门加工部网站!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯卷帘门的负荷试门及调试注意事项
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://www.jnhsjlm.com

地址:济南市天桥区金牛建材市场

卷帘门的负荷试门及调试注意事项

来源:http://www.jnhsjlm.com 日期:2022-11-29 发布人:
卷帘门的负荷试门及调试这一步骤非常的关键,如果检测没有任何问题存在,那么以上就可以真的运行起来了;反之就要及时进行处理,下面济南卷帘门厂来讲讲卷帘门的负荷试门及调试注意事项。
The load test and commissioning of the roller shutter door is very critical. If there is no problem in the detection, the above can really be run; On the contrary, it should be handled in time. Next, Jinan Rolling Door Factory will talk about the load test and commissioning precautions of rolling doors.
用手动运行,再电动运行数次。观察判断运行状态,并作相应的调整,直运行无卡死、阻滞、限位不准及异常噪声,卷帘运行顺畅为止。无误后,拉动开闭机手动速放功能的可靠性。工程要求时,应安装温控自动释放装置,且易熔片应固定在外表面易受火的位置。
Operate manually and then electrically for several times. Observe and judge the operation state, and make corresponding adjustment until the operation is free of jamming, blocking, inaccurate limit and abnormal noise, and the roller shutter operates smoothly. After no error, pull the reliability of the manual quick release function of the switch. If required by the project, automatic temperature control release device shall be installed, and the fusible plate shall be fixed at the position where the external surface is vulnerable to fire.
注意事项:
matters needing attention:
1、产品在运输过程中要平稳、牢固,避免碰撞损坏;轻抬轻放,严禁磕、摔、撬等行为,防止机械变形损坏产品,影响安装使用。
1. The product shall be stable and firm during transportation to avoid collision damage; Lift and place with care. Knock, fall, pry and other behaviors are strictly prohibited to prevent mechanical deformation from damaging products and affecting installation and use.
济南卷帘门厂
2、安装人员须注意施工,带好帽,系好带。
2. The installation personnel must pay attention to construction safety, wear safety helmets and fasten safety belts.
3、施工及调试期间,严禁卷帘下面站人和有行人通过,以防意外发生;在卷帘安装部位应有醒目的“禁止通行”标志。
3. During construction and commissioning, it is strictly forbidden to stand under the roller shutter and pedestrians to pass through to prevent accidents; There shall be a striking "No Passage" sign at the installation position of the roller shutter.
4、安装过程中要与水暖电安装、吊顶安装、石材施工、铝板施工以及玻璃幕墙施工队伍相互配合作业。
4. During the installation process, it shall cooperate with the construction teams of plumbing, ceiling, stone construction, aluminum plate construction and glass curtain wall.
5、安装大小端板时,用水平管测量两端板的一致。
5. When installing large and small end plates, use a horizontal tube to measure the consistency of the center of the two end plates.
卷帘门的负荷试门及调试注意事项相关信息就为您讲解到这里了,您作为参考时要注意名字什么的,防止下顺利使用。更多相关内容就来联系我们http://www.jnhsjlm.com咨询吧!
This is the end of the information about the load test and commissioning precautions of the roller shutter door. You should pay attention to the name when you use it as a reference to prevent it from being used smoothly. Contact us for more information http://www.jnhsjlm.com Consult!

阅读/ Recommended reading

1、卷帘机应定期检查(少每年3次),并根据需要及时加油,以确保快速卷帘门的正常使用。1. The rolling shutter machine should be regula...

济南卷帘门厂:电动卷帘门的电动驱动标准 2024-03-20
电动卷帘门如何选择合适的型号 2024-03-17
PVC卷帘门适用于哪些场合? 2024-03-17
自动伸缩门维修技巧及工作原理 2024-03-13

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门