卷帘门不断发展应用到大型企业、、地下车库、厂房及其他人员进行密集的场所，难免会遇到学习一些小问题需要我们解决，济南卷帘门厂认为查看问题时先看卷帘门有没有施加作用。

Rolling shutter doors have been continuously developed and applied to large enterprise supermarkets, shopping malls, underground garages, workshops and other places where people are concentrated. It is inevitable that we will encounter some small problems in learning and need to solve them. Jinan Rolling shutter door factory thinks that when checking the problems, we should first see if the rolling shutter doors have any effect.

检查电源，看的卷帘门，具有电源断路器，如果没有电，应检查电源线部分。如果上电时，快门控制箱应该是绿色的电源指示灯“常亮.”如果指示灯不亮，此时我们检查变压器（变压器270欧姆电阻器）的控制箱内部被燃烧。

Check the power supply. The rolling shutter door is equipped with a power circuit breaker. If there is no power, check the power cord. If the shutter control box is powered on, the green power indicator light should be "normally on". If the indicator light is not on, we should check that the control box of the transformer (270 ohm resistor of the transformer) is burned inside.

如果电源指示灯闪烁绿色，表示电源部分可以是淘汰，如果条目具有可能性来控制备用电源箱板没有电力短缺烧毁;还可以按住电源板和备电源板被烧毁。

If the power indicator flashes green, it means that the power part can be eliminated. If the entry has the possibility to control that the standby power box board is not burned due to power shortage; You can also press and hold the power board and standby power board to burn.

此外在安装时，先在需要安装的门框框口位置画出线，然后找工作人员设计出合适的卷帘门，先把卷帘门的门框固定，这里要先拆掉门框下部的固定板。安装卷帘门扇主体门扇。一定要保证卷帘门与墙体结成整体，封闭性要做好，再粉刷洞口及墙体。粉刷完毕后，门缝应均匀平整，开启卷帘门应该自由轻便，不得有过紧、过松和反弹现象。

In addition, during the installation, draw a line at the door frame opening to be installed first, and then ask the staff to design a suitable rolling shutter door. First fix the door frame of the rolling shutter door. Here, remove the fixing plate at the lower part of the door frame. Install the main door leaf of roller shutter door leaf. Make sure that the rolling shutter door and the wall form a whole, and the sealing must be done well before painting the hole and wall. After painting, the door seam shall be even and smooth, and the rolling shutter door shall be free and easy to open, without too tight, too loose and rebound.

要保持轨道运行畅通，及时清理卷帘门的轨道，保持内部清洁，卷帘门电机和传动链条要经常加注润滑剂，检查控制箱内器件和开关控制盒，紧固接线端口，紧固螺丝等，清洁控制箱内、表面和按钮上的灰尘污物，防止按钮卡住而不能反弹。在卷帘门的使用过程中，要尽量保持控制器和电压的稳定，禁止安装在潮湿的环境，如若发现门体上有电线缠绕、打结等应及时处理。

Keep the track running smoothly, clean the track of the roller shutter door in time, and keep the interior clean. The motor and drive chain of the roller shutter door shall be regularly filled with lubricant, check the components in the control box and the switch control box, fasten the wiring port, fasten the screws, etc., clean the dust and dirt in the control box, the surface and the buttons, and prevent the buttons from sticking and not rebounding. During the use of rolling shutter door, the controller and voltage shall be kept stable as far as possible, and it is prohibited to install it in a damp environment. In case of wire winding or knotting on the door body, it shall be handled in a timely manner.

卷帘门可以通过遥控进行控制，开关比较方便，对于存储物品来说是比较的一种门，而且可以方便的安装在任何适当的地方。您有需求可以随时来我们网站http://www.jnhsjlm.com进行咨询了解！

The roller shutter door can be controlled by remote control. It is convenient to open and close. It is a safe door for storing goods and can be conveniently installed in any appropriate place. You can come to our website anytime you need http://www.jnhsjlm.com Ask about it!