感应玻璃门使用广泛在各种场所都有安装，但是很多人不知道为什么要定期对感应玻璃门的运行进行检测？济南卷帘门厂家告诉你：对感应玻璃门定期进行运行检测，可以有效保障通行人员，可以提前发现感应玻璃门是否存在问题，如未定期进行运行检测就可能会突发各种情况，严重可能还会夹伤通行人员。

Sensing glass doors are widely used and installed in various places, but many people do not know why they should regularly detect the operation of sensing glass doors? Jinan rolling shutter door manufacturer tells you that regular operation detection of the sensing glass door can effectively ensure the safety of the passing personnel, and can find out whether there is a problem with the sensing glass door in advance. If the operation detection is not carried out regularly, various situations may occur, and the passing personnel may be seriously injured.

1.人员以正常速度从门外或门内走向感应玻璃门，感应玻璃门应该自动打开，感应玻璃门的动作应该平滑而且没有出现碰撞的情况；感应玻璃门打开后，人员以每秒约150mm-200mm的速度慢速通过感应玻璃门时，感应玻璃门应该保持打开状态；

1. Personnel move towards the sensing glass door from outside or inside the door at normal speed. The sensing glass door should open automatically, and the movement of the sensing glass door should be smooth without collision; After the sensing glass door is opened, the sensing glass door should remain open when the personnel slowly pass through the sensing glass door at a speed of about 150mm-200mm per second;

2.当人员离开感应玻璃门感应器感应区后，在延时1-10秒后（时间长短可以由感应玻璃门开关参数来设置），感应玻璃门将自动关闭，感应玻璃门的动作应该平滑而且没有出现碰撞的情况；

2. When a person leaves the sensing area of the sensing glass door sensor, after a delay of 1-10 seconds (the length of time can be set by the switch parameters of the sensing glass door), the sensing glass door will automatically close, and the movement of the sensing glass door should be smooth and there should be no collision;

3.观察人员正常通过感应玻璃门的行走路线，需要把日常行走路线调整为人员正对走向感应玻璃门，而不是以一定的角度走向感应玻璃门；

3. Observe the normal walking route of the personnel through the sensing glass door. It is necessary to adjust the daily walking route to that the personnel are walking towards the sensing glass door directly, rather than walking towards the sensing glass door at a certain angle;

4.走向感应玻璃门时，感应玻璃门感应器的感应宽度范围应该大于门完全打开的宽度；

4. When walking towards the sensing glass door, the sensing width range of the sensing glass door sensor should be greater than the width of the fully opened door;

5.如果感应玻璃门安装了辅助光线传感器（红外对射保护装置），当门打开时，人站着不动，用手遮挡辅助光线传感器，门应该保持打开状态。当手离开后几秒内，门应该重新关闭。

5. If the sensing glass door is equipped with an auxiliary light sensor (infrared radiation protection device), when the door is opened, people stand still and block the auxiliary light sensor with their hands, and the door should remain open. The door should be closed again within a few seconds after the hand leaves.

感应玻璃门运行检测注意保障感应玻璃门、可靠地运行，用户或感应玻璃门管理人员在日常需要对感应玻璃门进行必要的运行检查。[测试检查需要在没有其他人员干扰的情况下进行；感应玻璃门出现故障时，请立即切断感应玻璃门电源，然后联系厂家处理。更多相关内容就来我们网站http://www.jnhsjlm.com咨询吧！

During the operation detection of the sensing glass door, attention shall be paid to ensure the safe and reliable operation of the sensing glass door. The user or the sensing glass door management personnel shall carry out necessary operation inspection on the sensing glass door in daily needs. [The test and inspection should be carried out without the interference of other personnel; when the sensing glass door fails, please cut off the power supply of the sensing glass door immediately, and then contact the manufacturer for handling. For more information, please visit our website http://www.jnhsjlm.com Ask!