1. Safe operation: Before using the fast door, ensure that all relevant safety equipment and systems are working properly. Familiar with the operation methods of opening, closing, and emergency stopping of fast doors, and follow the correct procedures for operation.

2、保持通道畅通：在快速门周围保持通道畅通，避免堆放物品或有人员阻挡门的开闭。

2. Keep the passage unobstructed: Keep the passage unobstructed around the fast door to avoid stacking objects or people blocking the opening and closing of the door.

3、防止碰撞和损坏：避免车辆或其他物体与快速门碰撞，以免损坏门体或导轨。尤其是在开启和关闭过程中要特别小心，避免突然停车或加速造成的冲击。

3. Prevention of collision and damage: Avoid vehicles or other objects colliding with the fast door to avoid damaging the door body or guide rail. Especially during the opening and closing process, special care should be taken to avoid the impact caused by sudden parking or acceleration.

4、定期检查和维护：定期检查快速门的各个部件是否正常运行，如传动装置、控制系统、感应器等。及时处理发现的问题，避免因故障造成的延误和隐患。

4. Regular inspection and maintenance: Regularly check whether various parts of the fast door operate normally, such as the transmission device, control system, sensor, etc. Timely address any issues discovered and avoid delays and safety hazards caused by malfunctions.

5、清洁和保养：定期清洁快速门表面、导轨和密封条等部位，以保持良好的运行状态。根据厂商提供的保养手册进行保养，包括润滑和调整。

5. Cleaning and maintenance: Regularly clean the surface, guide rail, and sealing strip of the quick door to maintain good operating condition. Perform maintenance according to the maintenance manual provided by the manufacturer, including lubrication and adjustment.

6、遵守负荷限制：快速门通常有负荷限制，要确保在其承受范围内使用。超出负荷限制可能导致门体损坏或故障。

6. Comply with load limitations: Quick doors usually have load limitations and must be used within their tolerance range. Exceeding the load limit may cause damage or malfunction of the door body.

7、避免恶劣环境：避免在恶劣的环境下使用快速门，如极端高温、低温、潮湿或有腐蚀性气体等条件下。这些环境可能会对门体和部件产生不良影响。

7. Avoid harsh environments: Avoid using quick doors in harsh environments such as extreme high, low, humid, or corrosive gases. These environments may have adverse effects on the door body and components.

8、培训操作人员：确保操作人员经过培训并熟悉快速门的操作方法、注意事项和紧急情况的处理措施。

8. Train operators: Ensure that operators have received training and are familiar with the operation methods, safety precautions, and emergency response measures of the fast door.