The installation of fast rolling shutter doors is very extensive, and can be installed both inside and outside the factory workshop. However, some companies are concerned that if installed externally, they will be able to withstand prolonged exposure to wind and sun. This is only a small issue. The key is that if it rains heavily and the control box is drenched in rainwater, what should be done?

快速卷帘门的控制机箱比较容易出现进水、受潮、电路板短路等问题，以上情况大都出现在我国的南方地区，这是因为南方地区常年降雨量大，阴雨连绵，空气十分潮湿，一年中甚至会出现8个月的雨水。而南方地区又是我国的工业发达地区，快速卷帘门的应用比较普遍，因此非常需要这种问题的解答办法。

The control cabinet of the fast rolling shutter door is prone to problems such as water ingress, moisture, and circuit board short circuits. Most of the above situations occur in the southern regions of China. This is because the southern regions have heavy rainfall all year round, continuous rain, and the air is very humid, with even 8 months of rain in a year. The southern region is also an industrialized region in China, and the application of fast rolling shutter doors is relatively common, so there is a great need for solutions to this problem.

当发现产品控制机箱进水时，应时间切断电源，然后打开控制箱内部，擦干电路板及马达内的积水，晾干里面的水后，询找漏水的地方，用中性的玻璃胶封住漏洞，确保一切正常后，再打开电源，检查工作是否正常、电机及控制器有无短路等问题，确认一切正常后，就表示机箱进水故障已经排除了！

When water is found in the product control cabinet, the power should be cut off as soon as possible, and then the interior of the control cabinet should be opened. The accumulated water in the circuit board and motor should be wiped dry. After drying the water inside, the leaking area should be found, and the leak should be sealed with neutral glass glue. After ensuring everything is normal, the power should be turned on again to check whether it is working properly and whether the motor and controller have short circuits. After confirming everything is normal, It means that the water ingress fault in the chassis has been resolved!

如果产品的控制机箱已经出现了短路、无法正常工作的情况，请企业立即向原厂家汇报实际情况，让厂家派技术人员到现场进行检修，在检修前，放置好警示牌，防止出现安全问题。现在市面上好的厂家都正对这个问题对控制机箱进行了多重密封升级，因此选对产品也可以避免这种问题的发生，若是想了解十多年行业经验的国产品牌西朗门业快速卷帘门。可以直接联系客服获取详细的报价方案。

If there is a short circuit or malfunction in the control cabinet of the product, please immediately report the actual situation to the original manufacturer and have the manufacturer send technical personnel to the site for maintenance. Before maintenance, place warning signs to prevent safety issues. Nowadays, good manufacturers on the market are upgrading the control cabinet with multiple seals to address this issue. Therefore, choosing the right product can also avoid this problem. If you want to learn about the domestic brand Xilang Door Industry's fast rolling shutter doors with more than ten years of industry experience. You can directly contact customer service to obtain a detailed quotation plan.