PVC卷帘门对生产环境、空气质量要求较高的企业如：食品厂、饮料公司、电子线路厂、制药厂等厂房的无菌车间尤为需要。PVC卷帘门的门帘采用PVC帘布；经过工艺处理，表面具有很好的自洁性，不易沾染灰尘，方便清洁，具有耐磨，耐高温，耐低温等优点，可用于实验室、食品加工厂、快速车间、恒温室、洁净室等工作室。

PVC rolling shutter doors are particularly needed for sterile workshops in factories with high production environment and air quality requirements, such as food factories, beverage companies, electronic circuit factories, pharmaceutical factories, etc. The door curtains of PVC rolling shutter doors are made of high-quality PVC fabric; After process treatment, the surface has good self-cleaning properties, is not easily contaminated with dust, is easy to clean, and has advantages such as wear resistance, high temperature resistance, and low temperature resistance. It can be used in laboratories, food processing plants, rapid workshops, constant temperature rooms, clean rooms, and other studios.

PVC卷帘门使用注意事项

Precautions for using PVC rolling shutter doors

在使用PVC卷帘门的过程中，需要注意保持门尽可能干燥。如果表面沾上较多水分，一时间无法挥发掉，需要用柔软的干布擦拭干净。另外，要保持PVC卷帘门电机的表面清洁，进风口处没有灰尘、纤维等障碍物。

During the use of PVC roller shutter doors, it is important to keep the doors as dry as possible. If there is a lot of moisture on the surface that cannot evaporate for a while, it needs to be wiped clean with a soft dry cloth. In addition, the surface of the PVC roller shutter door motor should be kept clean, and there should be no obstacles such as dust and fibers at the air inlet.

尽量避开门附近的其他物体，尤其是一些易挥发的气体或腐蚀性强的液体，否则可能会损坏门的表面，使材料表面发生变色和脱落。

Try to avoid other objects near the door, especially volatile gases or highly corrosive liquids, otherwise it may damage the surface of the door, causing discoloration and detachment of the material surface.

使用时要注意PVC卷帘门的棱角不要有太大的摩擦，检查周围是否有会引起强烈摩擦的物体，如果有，请尽可能去除它们以防止门的磨损，PVC卷帘门的棱角磨损会造成表层脱落的问题。

When using, it is important to pay attention to the edges and corners of PVC rolling shutter doors and avoid excessive friction. Check for objects around that may cause strong friction. If there are, please remove them as much as possible to prevent door wear. The wear of PVC rolling shutter doors can cause surface peeling.

如果PVC卷帘门的热保护装置连续启动，要查明故障原因，看设备是否过载或设定的保护值过低，使根据具体原因适当调整，设备故障解决后，可重新启动。

If the thermal protection device of the PVC rolling shutter door is continuously activated, the cause of the malfunction should be identified to see if the equipment is overloaded or the set protection value is too low. Adjustments should be made according to the specific cause. After the equipment malfunction is resolved, it can be restarted.

经常清洁门的表面，可以使用柔软干净的棉布擦拭，遇到比较顽固的污渍时，尽量不要用硬物划伤，这样很容易在门面上造成划痕。这些顽固的污渍可以选择使用清洁剂去除。

Regularly clean the surface of the door, you can use a soft and clean cotton cloth to wipe it. When encountering stubborn stains, try not to scratch them with hard objects, as this can easily cause scratches on the door surface. These stubborn stains can be removed with cleaning agents.

如果发现PVC卷帘门的螺母、铰链、螺丝等有松动，必须要及时紧固，防止门掉落、卡住或异常振动以及其他问题。

If the nuts, hinges, screws, etc. of PVC roller shutter doors are found to be loose, they must be tightened in a timely manner to prevent the door from falling, jamming, abnormal vibration, and other problems.

本文由济南卷帘门厂整理发布，您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.jnhsjlm.com我们会有更多精彩内容等你查看

This article is compiled and published by Jinan Rolling Shutter Door Factory. Do you have any understanding of these contents? For more information, please click on: http://www.jnhsjlm.com We will have more exciting content waiting for you to view