欢迎光临济南市天桥区昌达卷帘门加工部网站!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯 玻璃自动感应门出现异响是什么原因
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://www.jnhsjlm.com

地址:济南市天桥区金牛建材市场

玻璃自动感应门出现异响是什么原因

来源:http://www.jnhsjlm.com 日期:2024-01-18 发布人:

卷帘门遥控器的配对过程有一定的差异,具体步骤可能会因厂家和型号而异。以下是一般常见的卷帘门遥控器配对方法:

The pairing process of the remote control for rolling shutter doors may vary, and the specific steps may vary depending on the manufacturer and model. The following are common pairing methods for remote control of rolling shutter doors:

20220308042733511.jpg

检查卷帘门电源:确保卷帘门电源已打开,并且处于正常工作状态。

Check the power supply of the rolling shutter door: Ensure that the power supply of the rolling shutter door is turned on and in normal working condition.

准备遥控器:打开遥控器的电池仓,确认电池极性正确,并确保遥控器电池有足够的电量。

Prepare the remote control: Open the battery compartment of the remote control, confirm that the battery polarity is correct, and ensure that the remote control battery has sufficient power.

进入配对模式:根据卷帘门的说明书或厂家提供的操作指南,进入遥控器配对模式。常见方式是通过按下遥控器上的特定按键或通过设置控制面板上的开关。

Enter pairing mode: According to the manual of the rolling shutter door or the operation guide provided by the manufacturer, enter the remote control pairing mode. The common way is by pressing specific buttons on the remote control or by setting switches on the control panel.

设置遥控器信道:有些卷帘门遥控器支持多信道功能,可以通过调整信道来避免与其他设备冲突。在配对模式下,可以使用遥控器上的相应按键或面板上的开关设置所需的信道。

Set remote control channel: Some roller shutter door remote controls support multi-channel function, which can be adjusted to avoid conflicts with other devices. In pairing mode, the desired channel can be set using the corresponding buttons on the remote control or switches on the panel.

配对确认:在配对模式启动后,将遥控器靠近卷帘门控制系统,并按下要配对的功能按键(如开、关、停止)。卷帘门控制系统会接收到遥控器发出的信号,并进行匹配和确认。

Pairing confirmation: After the pairing mode is activated, place the remote control close to the roller shutter door control system and press the function button to be paired (such as on, off, and stop). The roller shutter door control system will receive signals from the remote control and perform matching and confirmation.

测试遥控器:完成配对后,进行功能测试,确保遥控器能够准确地控制卷帘门的开关、停止等操作。

Test remote control: After completing pairing, perform a functional test to ensure that the remote control can accurately control the opening and closing, stopping, and other operations of the rolling shutter door.

阅读/ Recommended reading

电动卷闸门的安装应按照所采用的卷闸门种类,采取相适应的安装方法。The installation of electric roller shutter should adopt a...

自动门水晶卷帘门安装方法介绍 2024-02-23
电动卷帘门常见的故障及维修方法 2024-02-21
电动卷帘门的快速保养与维护 2024-02-10
不锈钢卷帘门的维护事项要注意什么? 2024-02-10

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门