欢迎光临济南市天桥区昌达卷帘门加工部网站!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯电动卷帘门的快速保养与维护
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://www.jnhsjlm.com

地址:济南市天桥区金牛建材市场

电动卷帘门的快速保养与维护

来源:http://www.jnhsjlm.com 日期:2024-02-10 发布人:

清洗卷帘时尽量不要脱水和烘干,要自然风干,以免毁坏窗帘自身的质感。

When cleaning roller blinds, try not to dehydrate or dry them, and air dry them naturally to avoid damaging the texture of the curtains themselves.

遮光面料的窗帘清洗时只需用棉纱布蘸上酒精或汽油悄悄地擦就行了,不能用力拧绞以免绒毛脱掉,影响美观。

When cleaning curtains made of blackout fabric, simply use a cotton cloth dipped in alcohol or gasoline to quietly wipe them. Do not twist them forcefully to prevent the fuzz from falling off and affecting the appearance.

对于软性废品帘,则可用抹布蘸些温水溶开的洗濯剂或少许氨溶液擦拭,有些部位有用胶黏合的,要注意不要进水。

For soft waste curtains, a cloth dipped in warm water soluble detergent or a small amount of ammonia solution can be used to wipe. Some parts are glued together, so be careful not to let water enter.

有些材质特殊的卷帘,如背胶窗帘或针织布,务必送干洗,切勿水洗,以免布料损坏或变形。有些窗帘做有上盖式的外型,或窗帘上加有装饰品,如丝穗或吊穗等,也要干洗或手洗,不能机洗。为进一步提升的使用性能,在日常维护中要注意以下几点、

Some roller blinds with special materials, such as adhesive curtains or knitted fabrics, must be sent for dry cleaning and not washed with water to avoid damage or deformation of the fabric. Some curtains have a top style appearance or have decorations added to them, such as silk tassels or hanging tassels, and they also need to be dry cleaned or hand washed, not machine washed. To further improve its performance, the following points should be noted in daily maintenance:

济南电动卷帘的日常维护工作:

Daily maintenance work for Jinan electric roller blinds:

清理电动卷帘:电动卷帘内腔应吹扫清理干净,无残存物及水溶液,电动卷帘外部应抹洗干净,无脏物、油圬。

Cleaning the electric roller shutter: The inner chamber of the electric roller shutter should be blown clean, without any residue or aqueous solution. The exterior of the electric roller shutter should be wiped clean, without dirt or oil.

防蚀处理:掏出填料函中的盘根、防止阀杆电化腐蚀,电动卷帘密封面、阀杆、阀杆螺母、机加工表面等部位,视具体情况涂防锈剂、润滑脂,涂漆部位应涂刷防锈漆。

Anti corrosion treatment: Remove the packing from the packing box to prevent electrochemical corrosion of the valve stem. Apply rust inhibitor and lubricating grease to the sealing surface of the electric roller shutter, valve stem, valve stem nut, machined surface, and other parts depending on the specific situation. The painted parts should be coated with rust proof paint.

配齐阀件:电动卷帘缺件后,不能拆东补西,应配齐阀件,为下步使用创造良好条件,保证电动卷帘处于完好。

Complete valve components: After the electric roller shutter is missing parts, it cannot be disassembled to make up for the missing parts. Valve components should be complete to create good conditions for the next use and ensure that the electric roller shutter is in good condition.

20220611045035830.jpg

防护保护:防止他物撞击,人为搬弄和拆卸,必要时应对济南电动卷帘活动部位进行固定,对电动卷帘进行包装保护。

Protection and protection: To prevent impact from other objects, manual handling and disassembly. If necessary, the moving parts of the Jinan electric roller shutter should be fixed, and the electric roller shutter should be packaged and protected.

定期保养:闲置时间较长的电动卷帘,应定期检查,定期保养,防止电动卷帘锈蚀和损坏。

Regular maintenance: Electric roller blinds that have been idle for a long time should be inspected and maintained regularly to prevent rusting and damage.

电动卷帘门在启闭中止进程中,应具有随位中止之功用,不应有中止而持续下滑景象,如发作下滑间隔大于50mm的状况呈现,应立刻对卷帘门控制电器和卷门机制动器停止检修。

The electric rolling shutter door should have the function of stopping in place during the opening and closing process, and there should be no continuous sliding phenomenon due to stopping. If the sliding interval is greater than 50mm, the control electrical appliances and rolling shutter mechanism actuators of the rolling shutter door should be immediately stopped for maintenance.

卷帘门门帘和易锈部位,应停止活期防腐、油漆及颐养处置,制止用重物、硬物冲击门面。

Rolling shutter doors, curtains, and easily rusted areas should be treated with anti-corrosion, painting, and personal care measures to prevent heavy or hard objects from impacting the facade.

本文由济南卷帘门厂友情奉献.更多有关的知识请点击:http://www.jnhsjlm.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from Jinan Roller Shutter Door Factory. For more information, please click: http://www.jnhsjlm.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

阅读/ Recommended reading

1、编码器安装:1. Encoder installation:将编码器轴头塞入减速机预留的10MM空位,并用搬手将两个螺丝固定在减速机上,要求:螺丝要锁紧,防止编码器松动造成限位...

济南卷帘门厂:如何使用遥控卷帘门? 2024-05-24
济南卷帘门厂:卷帘门的工作原理 2024-05-23
济南卷帘门厂:卷帘门钥匙丢了怎么配? 2024-05-21
济南卷帘门厂: 卷帘门的分类 2024-05-17

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门