欢迎光临济南市天桥区昌达卷帘门加工部网站!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯快速门控制箱的安装要注意哪些技巧?
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://www.jnhsjlm.com

地址:济南市天桥区金牛建材市场

快速门控制箱的安装要注意哪些技巧?

来源:http://www.jnhsjlm.com 日期:2024-06-09 发布人:

1、编码器安装:

1. Encoder installation:

将编码器轴头塞入减速机预留的10MM空位,并用搬手将两个螺丝固定在减速机上,要求:螺丝要锁紧,防止编码器松动造成限位跑位。

Insert the encoder shaft into the reserved 10mm space of the reducer, and fix the two screws onto the reducer with a handle. The requirement is to lock the screws tightly to prevent the encoder from loosening and causing limit displacement.

2、控制箱安装:

2. Control box installation:

20230617024636106.jpg

控制箱安装在电机一侧地面到控制箱下口1.3m,控制箱和轨道之间距离是10cm。雷达线、电机线、光电线、编码器等线从穿线管进入控制箱。

The control box is installed on one side of the motor from the ground to the lower opening of the control box at a distance of 1.3m, and the distance between the control box and the track is 10cm. Radar wires, motor wires, photoelectric wires, encoders, and other wires enter the control box through conduit.

3、接线及调试方法:

3. Wiring and debugging methods:

具体的控制箱有对照的接线图,请保证线位不要错误。

There is a wiring diagram for the specific control box, please ensure that the wiring positions are not incorrect.

4、包厢安装:

4. Box installation:

调试结束,把门体包厢盖用自钻螺丝固定,电机盖盖好用膨胀胶塞固定于墙体

Debugging is completed, fix the door body and compartment cover with self drilling screws, and fix the motor cover to the wall with expansion rubber plugs

阅读/ Recommended reading

1、编码器安装:1. Encoder installation:将编码器轴头塞入减速机预留的10MM空位,并用搬手将两个螺丝固定在减速机上,要求:螺丝要锁紧,防止编码器松动造成限位...

济南卷帘门厂:如何使用遥控卷帘门? 2024-05-24
济南卷帘门厂:卷帘门的工作原理 2024-05-23
济南卷帘门厂:卷帘门钥匙丢了怎么配? 2024-05-21
济南卷帘门厂: 卷帘门的分类 2024-05-17

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门