日常使用中有时会发现铝合金卷帘门框周边同墙体连接处出现渗漏水，尤其窗下角为多见，其次是组合窗的拼接处。下面小编来为大家解答铝合金卷帘门如果出现渗水我们该怎么办。

In daily use, it is sometimes found that there is water leakage at the connection between the aluminum alloy roller shutter door frame and the wall, especially at the lower corner of the window, followed by the splicing of the composite window. Here is a small compilation to explain what we should do if there is water seepage in the aluminum alloy roller shutter door.

1、因为邻近合金卷帘门窗洞口的建筑墙体自身存在缺陷，致使雨水在风荷载作用下透过墙体直接渗透室内，特别是在外墙为粘贴面砖的时候现象较常见，由于面砖间的缝隙常有微细裂痕存在。此现象因为渗水部位接近合金卷帘门窗而往往被误以为是合金卷帘门窗漏水。

1. Because the building wall adjacent to the alloy shutter door and window opening has its own defects, the rainwater directly penetrates the room through the wall under the wind load, especially when the exterior wall is pasted with face bricks. Because the cracks between the face bricks often exist. This phenomenon is often mistaken for water leakage of alloy roller shutter doors and windows because the water seepage part is close to the alloy roller shutter doors and windows.

2、充填材料没有布满合金卷帘门窗框与墙体间的间隙，形成了空谷现象或裂痕。

2. The filling material is not full of the gap between the alloy roller shutter door and window frame and the wall, forming a hollow phenomenon or cracks.

3、固定铝合金卷帘门窗框的调整垫块残留于合金卷帘门窗框内，或拆除后没有再进行二次充填。

3. The adjustment pad for fixing the aluminum alloy roller shutter door and window frame remains in the alloy roller shutter door and window frame, or no secondary filling is carried out after removal.

4、铝合金卷帘门窗与洞口墙体之间的间隙，未能按要求充填合格的材料，如防水水泥砂浆的标号分歧错误或配比分歧格。

4. The gap between the aluminum alloy roller shutter doors and windows and the hole wall is not filled with qualified materials as required, such as the wrong mark or mix proportion of waterproof cement mortar.

5、墙体洞口足寸不符合设计要求，造成合金卷帘门窗形状足寸与墙体间的间隙超过划定范围，太小的间隙造成无法充填材料，过大的间隙使合金卷帘门窗难以固定且充填不实易产生裂痕等。

5. The size of the wall opening does not meet the design requirements, resulting in the gap between the size of the alloy roller shutter door and window and the wall exceeding the designated range, too small gap causing the inability to fill materials, and too large gap making it difficult to fix the alloy roller shutter door and window, and the filling is not solid and easy to produce cracks.

6、铝合金卷帘门窗与洞口的固定连接不牢，使合金卷帘门窗在风荷载作用下产生移动而使密封材料产生裂痕。

6. The fixed connection between the aluminum alloy roller shutter doors and windows and the hole is not firm, which makes the alloy roller shutter doors and windows move under the wind load and causes cracks in the sealing materials.

7、铝合金卷帘门窗安装完毕之后没有在合金卷帘门窗外侧与墙体的连接部位进行密封，或密封失效。

7. After the installation of aluminum alloy roller shutter doors and windows, the connection part between the outside of the alloy roller shutter doors and windows and the wall is not sealed, or the sealing is invalid.

8、对于有转角或连通形式的合金卷帘门窗，位于转角或连通部位的连接杆件的上部没有进行封堵，易造成渗漏雨水由上而下进入室内。

8. For alloy roller shutter doors and windows with corners or connecting forms, the upper part of the connecting rod at the corners or connecting parts is not blocked, which is easy to cause leakage of rainwater into the room from top to bottom.

铝合金卷帘门在现在的住宅中被大量采用，在实际安装施工中，如果不注意一些细节，往往会给以后的使用留下隐患，出现渗水。以上就是为您提醒的问题应对内容了，您有问题可随时来网站http://www.jnhsjlm.com留言咨询！

Aluminum alloy roller shutter doors are widely used in current residences. In the actual installation and construction, if you do not pay attention to some details, it will often leave hidden dangers for future use and cause water seepage. The above is the question response content for you. You can come to the website at any time if you have any questions http://www.jnhsjlm.com Message consultation!