卷帘门适用于车库、医院、商业门面、厂矿、、企业等公共场所或住宅。尤其是门洞较大，不便安装地面门体的地方起到方便、快捷开启作用。下面小编来为您讲讲不锈钢卷帘门安装策略。

Rolling shutter doors are applicable to public places or residences such as garages, hospitals, commercial facades, factories and mines, shopping malls, enterprises, etc. In particular, the door opening is large, and it is convenient and quick to open the door where it is inconvenient to install the ground door body. The following small series will tell you about the installation strategy of stainless steel rolling shutter door.

1、安装前准备工作

1. Preparation before installation

把门框和墙体固定在一起，这一步非常关键，直接影响到后续的安装操作。一定要是先画好线，确保整个门框处在同一个平面，然后用膨胀螺丝进行固定。如果墙体本身的强度不是很高，或者不够平整，还需要用混凝土进行加固和找平。有些时候还需要在边框上灌注混凝土，在凝固之后可以达到非常高的强度，避免日后出现松旷的问题。

Fixing the door frame and wall together is very critical, which directly affects the subsequent installation operation. Make sure to draw a line first to ensure that the whole door frame is in the same plane, and then fix it with expansion screws. If the strength of the wall itself is not very high or not smooth enough, it needs to be reinforced and leveled with concrete. In some cases, it is also necessary to pour concrete on the frame, which can reach very high strength after solidification to avoid the problem of looseness in the future.

2、卷帘门安装之整理配件

2. Sorting accessories for roller shutter door installation

门框固定好之后，就可以进行门扇的安装。卷帘门的门扇都是事先订做好的，在现场需要做进一步的组装，和机头部分的传统机构连接在一起，要保证既不能太松也不能太近，如果太送就会发生晃动或者噪音，而如果太紧又会影响到正常的开启和关闭。特别是应用在室外的卷帘门，更容易受到风雨以及灰尘的影响，所以需要留出适当的余量，以避免因为杂物进入而卡住。

After the door frame is fixed, the door leaf can be installed. The door leaves of the roller shutter are ordered in advance. Further assembly is required at the site. They are connected with the traditional mechanism of the machine head. It should be ensured that they are neither too loose nor too close. If they are too delivered, they will shake or make noise. If they are too tight, they will affect the normal opening and closing. In particular, the rolling shutter doors applied outdoors are more vulnerable to the impact of wind, rain and dust, so appropriate allowance should be reserved to avoid being stuck due to the entry of debris.

3、整体验收

3. Overall acceptance

现在的产品大多都支持自动感应以及遥控操作，遥控器也需要和控制系统进行配对，以便用户能够正常操作，并且起到应有的防盗作用。确定所有的功能都可以正常使用之后，就可以进行验收。此外，对于商用的卷帘门，还需要通过消防部门的验收，如果在防火方面存在缺陷或者问题，还需要进行整改。

Most of the current products support automatic sensing and remote control operation. The remote controller also needs to be paired with the control system so that users can operate normally and play a due role in anti-theft. After confirming that all functions can be used normally, acceptance can be carried out. In addition, commercial rolling shutter doors also need to pass the acceptance of the fire department. If there are defects or problems in fire protection, they need to be rectified.

不锈钢卷帘门的安装讲究什么策略？以上我们从三个方面来进行了解，当然您在使用卷帘门期间要做好相应的检查维保工作，关注我们网站http://www.jnhsjlm.com！

What is the installation strategy of stainless steel rolling shutter door? We have learned from three aspects above. Of course, you should do a good job of inspection and maintenance during the use of roller shutter doors, and pay attention to our website http://www.jnhsjlm.com ！